Knowledgebase
Dimension Engineering > Help Desk > Knowledgebase

Search help:


Firmware reset

Solution

Connect to DEScribe software to reset firmware on compatible motor drivers:

https://www.dimensionengineering.com/info/describe  Use version 3.9.9.

Physically connect the Sabertooth or Syren via USB to your computer and allow drivers to install if necessary.

Click the DOWNLOAD settings button. After the download, go to FILE > RESET TO DEFAULTS and select.

UPLOAD settings to device. Power cycle to test device with default settings.

 

Please note that having to repeatedly reset the firmware indicates a possible circuit incompatibility with the motor driver, and should be investigated further to avoid hardware damage.

 
Was this article helpful? yes / no
Related articles DELink2 & DELight Compatibility
Kangaroo Tuning Using DEScribe Software
Bricked 2x32, Error On during/after firmware update
Basic Troubleshooting for Motor Drivers
Disable R/C autocalibration without turning off the signal timeout on a Sabertooth
Article details
Article ID: 36
Category: Motor Drivers
Date added: 2024-08-19 17:06:21
Views: 293
Rating (Votes): Article rated 5.0/5.0 (1)

 
« Go back