Knowledgebase
Dimension Engineering > Help Desk > Knowledgebase

Search help:


» Category: R/C Switches  (Go back)

» Articles in this category:

 
Using Doubleswitch to switch between two devices Article rated 3.1/5.0
In addition to using DoubleSwitch to switch two devices on or off, it can be used to switch between devices- meaning while one device is on, the other is off, and vice versa. See attached diagram for ...
Use DoubleSwitch to reverse motor direction Article rated 3.1/5.0
The attached diagram will show how to wire a motor to DoubleSwitch for reversing its direction. DoubleSwitch can handle 8A of motor current.
Antiparallel diode for Picoswitch Article rated 3.0/5.0
PicoSwitch should not be used to switch inductive loads like motors or solenoids without an antiparallel diode. The attached diagram shows the antiparallel diode.
Can the mounting holes on any Dimension Engineering product be made larger? Article not rated yet
The answer to this question is, "no."  Do not drill out the holes larger. Doing so will void the warranty. The mounting hole size is integrated into the design of the board. Drilling out a larger hole...